Debian image for the ODroid-X2

Bookmark and Share

ODroid-X2If you’re in need of a Debian image for the ODroid-X2 – you can just use the one from the X, download here: odroidx-debian-R2.rar (Magnet / Torrent). User/Pass is “odroidx“.

The image contains a 3 GB filesystem. When flashing it on a bigger SDcard using w32diskimager (odroid edition),  you can resize the filesystem later on the X2 by running “resize2fs /dev/mmcblk0p3” (not working? Then you need to recreate the 3rd partition. Here’s a log that shows you how I did it)

Don’t know what the ODroid-X2 is? It’s the fastest and best single-board-computer you can get at the moment. Where to get it? Here: hardkernel.com

Specifications:

Processor:     Samsung Exynos4412 Cortex-A9 Quad Core 1.7Ghz with 1MB L2 cache
Memory:     2GB LP-DDR2 880Mega data rate
3D Accelerator:     Mali-400 Quad Core 440MHz
Video:     supports 1080p via HDMI cable(H.264+AAC based MP4 container format)
Video Out:     micro HDMI connector / RGB-24bit LCD interface port
Audio:     Standard 3.5mm headphone jack and microphone jack
LAN:     10/100Mbps Ethernet with RJ-45 Jack ( Auto-MDIX support)
USB2.0 Host:      High speed standard A type connector x 6 ports
USB2.0 Device:      ADB/Mass storage(Micro USB)
Display:     HDMI monitor / LCD panel with RGB or LVDS interface
Storage:     Full size SDHC Card Slot, eMMC module socket
Power:    5V 2A Power
System Software:     u-boot 2010.12, Kernel 3.0.15, Android4.0.x(ICS)
Size:      90 x 94 mm

Bookmark the permalink.

7 Responses to Debian image for the ODroid-X2

  1. Rob says:

    Thanks for hosting the Debian Odroid X2 image! What’s the login/password ?

    • Dunkel85 says:

      That should be user odroidx, pass odroidx.
      You can then get change pw via “passwd”,
      get root via “sudo su” and change root pass also via “passwd”.

      Let me know if you need any help.

  2. antn says:

    Is this image also working on ODROID-U2?

    • Dunkel85 says:

      Oh, I doubt that. It was specifically mentioned as fitting for the X,
      it’s more a coincidence that it still works properly on the X2.

      I’d suggest to try it with an extra SD card, if you have one.
      Or alternatively backup your current one, flash this image and give it a try.
      If it doesn’t work, you can just flash your backup image again.

      I’d also like to know if this image works for the U2, then I could mention it in the post.
      Feel free to try :)

      Alternatively I’d suggest any Linux image for the U2 from the Hardkernel forums:
      http://forum.odroid.com/viewforum.php?f=9

      Greetings,

      Pete

  3. Hans Maulwurf says:

    Hey Guys,

    thanks for the image.
    But there is a hiden problem.
    Because the first X just store 1 GB of RAM.
    The X2 updated to 2 GB and on the image there is still 1 GB of RAM. So how can I fix the RAN size???

  4. kboo says:

    Hello,
    I have a problem with this image: there is only 1Gb of RAM instead of 2Gb when I check it with the command “free -m”:

    # free -m
    total used free shared buffers cached
    Mem: 992 947 44 0 99 592
    -/+ buffers/cache: 255 736
    Swap: 0 0 0

    What should I do? thanks for your help

  5. kboo says:

    I think u-boot was not correctly configured:
    https://community.freescale.com/thread/305189

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>